|Dimensions||W: 210mm H: 435mm D: 428mm (without feet)|
W: 210mm H: 460mm D: 428mm (with feet)
|Material(s)||SECC Steel and Tempered Glass|
|Motherboard Support||Mini-ITX, MicroATX, and ATX|
|I/O Ports||2 x USB 3.1 Gen 1|
1 x Audio/Mic
|Filters||Front right side panel, bottom front |
|Smart Device||3 x Fan channels with Max 10W per channel output* |
1 x RGB LED port
Built-in noise detection module
*Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.
|System Requirements||PC with open internal USB 2.0 port and Windows® 10 operating system recommended.|
Internet connection is needed to download CAM.
Some CAM features require Internet access, a valid email address and acceptance of our current Terms of Service.
|Vertical GPU Mount||Support 2 slot GPUs|
Riser card with 30cm length recommended. Riser card not included.
|Drive Bays||2.5”: 2+1|
|Radiator Support||Front: Up to 280mm|
|Fan Support||Front: 2 x 120/2 x 140mm|
Top: 1 x 120mm (1 Aer F120 Case Version included) / 1 x 140mm
Rear: 1 x 120mm (1 Aer F120 Case Version included)
|Fan Specs||Aer F120 (Case Version)|
Speed: 1200 + 200 RPM
CFM Noise: 28 dBA
Bearing: Rifle Bearing
|Clearance||Cable Management: 19-23mm|
GPU Clearance: Up to 381mm
CPU Cooler: Up to 165mm
Front Radiator: 60mm
Rear Radiator: 60mm
Reservoir & Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel)